Overview Options Values Gallery Videos 360 Catalogue

MP Series Transfer Printing Machine

MP Series transfer printing machines are produced with fixed Ø320mm cylinder diameter and 4 different cylinder width options as 1300/1700/1900/2200mm. Its usage areas are jersey printing, children’s wear, promotional items and so on. The MP series has been designed for small and medium-sized textile workshops, aiming to reduce the use of outsourcing, and to perform their production in-house. With its compact design that does not take up much space, it can be easily set up in production areas that are not too large. It is the best choice for businesses that will work as both piece and roll printing.

OPERATION TYPES

Digital Paper Rolls to Pieces of Fabric
Digital Paper Rolls to Rolls of Fabric
Digital Paper Pieces to Pieces of Fabric

OTHER SCOPES OF USE

Serigraphy Transfer Printing
Offset Printing
Flock Transfer

DRUM SPECIFICATIONS

The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.

FELT SPECIFICATIONS

100% Nomex industrial felt, which is reinforced with kevlar raw material and does not stretch under any circumstances, is used as felt in all of our machines. The life of the felt varies according to the usage, and the average life is between 1 and 3 years. There is an automatic felt centering system to prevent the felt from slipping to the right or left. The felt tensioning and centering system is pneumatic, and when the air does not come to the machine from the air compressor, the machine automatically slows down to protect the felt and the felt rotates forward for a certain time, then backwards and the machine cools down.

TOUCH SCREEN CONTROL PANEL

General control of the machine such as speed, temperature etc.
Metre Counter
Weekly Programming
Auto- Cooling System
Error Alerts
Controlling Machine Settings

MATERIAL INPUT / OUTPUT CONTROLS

Protection Paper

Input : Manually Adjusted Brake System
Output : Automatic Winding with Pneumatic Adjustment

Digital Paper

Input : Manually Adjusted Brake System
Output : Manually Adjusted Automatic Rewind

Roll Fabric

Input : Manually Adjusted Fabric Tension System
Output : Automatic Winding with Pneumatic Adjustment

Piece Fabric

Input : Manually laid on table
Output : Off the protection paper

TECHNICAL SPECIFICATIONS

Heating System
Max. Temperature
Average Heating Time
Average Cooling Time
Power Supply
Air Intake (Bar)
Electrical System
Felt Tension System
Felt Control System:
Drive Speed Control:
Paper Unwind-Rewind
Weekly Programming
Automatic Shut Down
Safety
Software Language
Warranty

Heat Transfer Oil
220C°
60-80 min.
150 min.
380 VAC – 3Ph 50/60 Hz or 220 VAC – 3 Ph 50/60 Hz
5-8 bar
PLC Control
Pneumatic
Automatic
AC Inverter
Compressed Shaft
Yes
Yes
4 Emergency Buttons – Safety Wire
English
2 Year Mechanical, 1 Year Electrical (User Fault Exempted)

Heating System: Heat Transfer Oil
Max. Temperature: 220C°
Average Heating Time: 60-80 min.
Average Cooling Time: 150 min.
Power Supply: 380 VAC – 3Ph 50/60 Hz or 220 VAC – 3 Ph 50/60 Hz
Air Intake (Bar): 5-8 bar
Electrical System: PLC Control
Felt Tension System: Pneumatic
Felt Control System: Automatic
Drive Speed Control: AC Inverter
Paper Unwind-Rewind: Compressed Shaft
Weekly Programming: Yes
Automatic Shut Down: Yes
Safety: 4 Emergency Buttons – Safety Wire
Software Language: English
Warranty: 2 Year Mechanical, 1 Year Electrical (User Fault Exempted)

SUBLIMATION PROCESS

STANDART OPTIONS

Iron Sheet Table

Standart table to lay down and prepare the fabric pieces/rolls for sublimation.

PAID OPTIONS

Option No: 1

Static Electric Prevention Bar

Eliminates the static electric generated during the transferring process, to ensure that the users doesn't get harmed. Strongly recommended.

Option No: 4

Glass Table And Table Lighting

Provides convenience when laying fabric on the table. Glass table and table lighting provides a better view when placing the fabric on the table and better working experience.

Option No: 2

Remote Access Ethernet Module

Is a card module installed on the PLC. Provides control over the machine even when you are not around. Enables Diferro to connect to the machine for troubleshooting.

Option No: 5

Ventilation Hood

Eliminates the fume generated during the sublimation process and ensures that the fumes don't spread around. Good choice to prevent the fume affect the operator.

DIMENSIONS & ENERGY CONSUMPTION VALUES

Machine	Drum Diameter		Drum Width		Maximum Working Width	Working Data			Maximum Current Input	Total Power	Avarage Energy Power	Drum Resistance Power	Drum Engine Power	Dimensions (Footprint with Table)	Net Weight	Dimensions of the Shipping Crate
MP SERIES
Code	mm	inch	mm	inch	mm	m/min	m/hour	m2/hour	Amp.	Kw	Kw	Kw	Kw	Cm	Kg	Cm	Kg
MP-13B320C	320	12.6″	1300	51.2″	1200	2.10	126	151	22,8	15	9,75	13,5	0,75	220x180x130	750	245x130x155	825
MP-17B320C			1700	66.9″	1600	2.10	126	202	30,4	20	13	18,5	0,75	260x180x130	1100	285x130x155	1210
MP-19B320C			1900	74.8″	1800	2.10	126	227	38	25	16,25	23,5	0,75	280x180x130	1320	305x130x155	1450
MP-22B320C			2200	85.6″	2100	2.10	126	265	45,6	30	19,5	28,5	0,75	310x180x130	1540	335x130x155	1695