DP Series Transfer Printing Machine
DP Series transfer printing machines are produced with 3 different drum diameter and 3 different drum width options as follows; Ø400 / Ø600 / Ø1000mm cylinder diameter and 1900/2200/3300 mm. Offers multiple configuration options to help easing the producing process. DP Series machines are more industrial machines than the MP Series, with bigger drum sizes and width options, thus increasing the printing speed accordingly. DP Series are capable to work with both rolls and pieces. Is an excellent transfer printing machine choice for bigger businesses, as it offers an exceptional printing experience and convenience for the users.
OPERATION TYPES
- Digital Paper Rolls to Pieces of Fabric
- Digital Paper Rolls to Rolls of Fabric
- Digital Paper Pieces to Pieces of Fabric
OTHER SCOPES OF USE
- Film Lamination
- Serigraphy Transfer Printing
- Offset Printing
- Flock Transfer
- Stone Printing
DRUM SPECIFICATIONS
The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.
FELT SPECIFICATIONS
All of our machines are equipped with 100% Nomex seamless industrial felt belts that are reinforced with Kevlar material in order to avoid stretching. The expected lifetime for the belt on this unit is between 3 & 5 years depending on use. In order to eliminate movement of the felt belt to either side the machine is built with an automated-felt centering mechanism. The felt tension and the felt centering system are both airoperated (Pneumatic). Should the compressor fail to supply the required air for the system, the machine halts and alerts the operator to prevent lasting damage to the belt.
TOUCH SCREEN CONTROL PANEL
- General control of the machine such as speed, temperature etc.
- Metre Counter
- Weekly Programming
- Auto- Cooling
- Touch-screen to Access various functions
MATERIAL INPUT / OUTPUT CONTROLS
Protection Paper
- Input : Manually Adjusted Brake System
- Output : Manually Adjusted Automatic Rewind
Digital Paper
- Input : Manually Adjusted Brake System
- Output : Manually Adjusted Automatic Rewind
Roll Fabric
- Input : Manually Adjusted Fabric Tension System
- Output : Manually Adjusted Automatic Rewind
Piece Fabric
- Input : Manually laid on table
- Output : Off the protection paper
TECHNICAL SPECIFICATIONS
SUBLIMATION PROCESS
STANDART OPTIONS
Drum Scraping Unit
Its a mechanism to get rid of the unwanted materials sticking to the drum.
Static Electric Preventing Wire
Eliminates the static electric generated during the transferring process, to ensure that the users doesn't get harmed. Strongly recommended.
Glass Table And Table Lighting
Provides convenience when laying fabric on the table. Glass table and table lighting provides a better view when placing the fabric on the table and better working experience.
Smoke Suction Unit
Eliminates the fume generated by the fabric and paper during the sublimation process, provides a better printing experience.
PAID OPTIONS
Option No: 2
Remote Access Ethernet Module
Is a card module installed on the PLC. Provides control over the machine even when you are not around. Enables Diferro to connect to the machine for troubleshooting.
Option No: 6
Table Conveyor Belt Unit
Helps to feed the papers and fabric to the machine better. It carries the fabric and papers into the drum and ensures that materials are fed to the machine constantly.
Option No: 10
Additional Digital Paper Feeding Shaft With Manual Break
It is for those who wish to continue with spare digital paper roll without stopping the machine, so that the printing can continue without interruption.
Option No: 5
Ventilation Hood
Eliminates the fume generated during the sublimation process and ensures that the fumes don't spread around. Good choice to prevent the fume affect the operator.
Option No: 9
External Fabric Windup Unit
It is for the winding of the output fabric roll not on the machine but on the unit, so that the printed fabric can be better cooled off, thus providing more space to work easily.
Option No: 17
Crushing Roller Over Drum
This option is for those who want to to lamination as well. Used for the special fabrics who needs crushing.
VIDEOS
PRODUCT CATALOGUE
Can’t decide which machine is the best suit for your business?
We are here to help. Drop us an email by clicking the button below or call us to contact our sales team.
