DM Series Transfer Printing Machine
DM Series transfer printing machines are produced with 3 different drum diameter and 3 different drum width options as follows; Ø400 / Ø600 / Ø1000mm cylinder diameter and 1900/2200/3300 mm. This machine is especially designed and developed, and is focused on solely roll to roll printing. Main usage areas are home textile, curtains, carpets and similars. As all of the other machines manufactured by Diferro, DM Series are also offering multiple configuration options to choose between and ease the printing process, and also bringing convenience.
OPERATION TYPES
- Digital Paper Rolls to Rolls of Fabric
OTHER SCOPES OF USE
- Serigraphy Transfer Printing
- Film Lamination
- Flock Transfer
DRUM SPECIFICATIONS
The drum is made of ST44 drawn steel pipe and all standard models are finished with surface grinding. On request the drum surface can also be plated with either chrome or Teflon. Inside the drum is one single heating unit that consists of three pieces. The drum is filled with transfer heating oil that fills up 60% of the inner volume. The failsafe-switch mechanism helps balance the inner pressure, and will deactivate the machine should there be any issues regarding the gasses generated by heated oil so to avoid injury or damage. The heat sensor is placed on the surface of the drum, this enables more accurate readings and provides better print results. Maximum Working Temperature and Temperature Restrictions can be easily adjusted via the Touch-Screen Panel.
FELT SPECIFICATIONS
100% Nomex industrial felt, which is reinforced with kevlar raw material and does not stretch under any circumstances, is used as felt in all of our machines. The life of the felt varies according to the usage, and the average life is between 1 and 3 years. There is an automatic felt centering system to prevent the felt from slipping to the right or left. The felt tensioning and centering system is pneumatic, and when the air does not come to the machine from the air compressor, the machine automatically slows down to protect the felt and the felt rotates forward for a certain time, then backwards and the machine cools down.
TOUCH SCREEN CONTROL PANEL
- General control of the machine such as speed, temperature etc.
- Metre Counter
- Weekly Programming
- Auto- Cooling System
- Error Alerts
- Controlling Machine Settings
MATERIAL INPUT / OUTPUT CONTROLS
Protection Paper
- Input : Pneumatic Brake System
- Output : Manually Adjusted Automatic Winding
Digital Paper
- Input : Pneumatic Brake System
- Output : Manually Adjusted Automatic Winding
Roll Fabric
- Input : Manually Adjusted Fabric Tension System
- Output : Potency Controlled Double Roll Rewind
TECHNICAL SPECIFICATIONS
SUBLIMATION PROCESS
STANDART OPTIONS
Drum Scraping
Unwanted materials may stick to the heated drum during the sublimation process and this may effect the print quality. Drum scraper helps to remove these unwanted materials from the drum.
Fabric Straightener
Enables the operator to control the tension the input fabric by a rod installed in the middle of the machine.
PAID OPTIONS
Option No: 1
Static Electric Prevention Bar
Eliminates the static electric generated during the transferring process, to ensure that the users doesn't get harmed. Strongly recommended.
Option No: 5
Ventilation Hood
Eliminates the fume generated during the sublimation process and ensures that the fumes don't spread around. Good choice to prevent the fume affect the operator.
Option No: 8
Automatic Fabric Laying Unit
Helps to lay down the printed fabrics to the desired place. This unit is also helpful for a better cooling of the fabric, as the fabric travels more distance.
Option No: 10
Additional Digital Paper Feeding Shaft
This option is for those who want to continue their without interruption by feeding the spare digital paper shaft right after the installed one is finished.
Option No: 11
Automatic Selvage Cutting Unit
This unit automatically cuts the edges of the fabric, providing a sharper and more defined edge.
Option No: 14
Front Walking Platform
Feeds the paper and the fabric below the platform so that the operator has the space in front of the machine to be able to work and walk.
Option No: 2
Remote Access Ethernet Module
Is a card module installed on the PLC. Provides control over the machine even when you are not around. Enables Diferro to connect to the machine for troubleshooting.
Option No: 7
Fabric Centering And Guiding Unit
This unit helps guiding the fabric and and centering it in case if it is misfed to the machine and prevents the print output to be damaged.
Option No: 9
External Fabric Windup Unit
This unit is for those who want to collect the output printed fabric not on the back of the machine but on an external windup unit. By this way, the operator has more space to work, and the fabric cools of better.
Option No: 12
Pnuematic Double Roller Crushing Unit
This unit is for the fabrics need crushing. Generally used for laminating.
Option No: 17
Crushing Roller Over Drum
Generally used for laminating. This crushing roller is just over the drum, instead of outside the machine.
VIDEOS
PRODUCT CATALOGUE
Can’t decide which machine is the best suit for your business?
We are here to help. Drop us an email by clicking the button below or call us to contact our sales team.
